OLIXIS Full Adjustable Bed Base Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This olixis full adjustable bed base review covers the key details of the OLIXIS Full Adjustable Bed Frame. It is a motorized electric base designed for Full-size mattresses. The two defining specs are its head incline range of 0 to 60 degrees and its foot incline range of 0 to 40 degrees. These angles allow you to adjust the bed for various sleeping positions. The base also features a wireless remote for easy control. It supports up to 750 pounds. This listing provides the essential data to help you decide if this adjustable frame meets your needs.
What stands out
- Head incline adjusts from 0 to 60 degrees
- Foot incline adjusts from 0 to 40 degrees
- Wireless remote control for operation
- 750 lb weight capacity
- No tools required for assembly
Who it fits
Good fit for
This base suits sleepers who need specific incline angles for comfort. The 0-60 degree head lift helps those who prefer sitting up or have back issues. The 0-40 degree foot lift assists with leg elevation. It works well with memory foam, latex, or hybrid mattresses. The 750 lb capacity supports heavier users. If you need a straightforward, tool-free setup with remote control, this frame fits your needs.
Who should skip it
Skip this option if you need a Twin XL or Queen size. This listing is for the Full size only. You also need a Full-size mattress, as the frame does not include one. If you prefer app control or Bluetooth connectivity, this base lacks those features. It uses a wireless remote instead. The base is 13.8 inches high, which may not suit those wanting a very low profile. Check the size carefully before buying.
Verdict: The OLIXIS Full Adjustable Bed Base offers reliable head and foot incline ranges for a straightforward adjustable setup. It is a practical choice for Full-size beds requiring remote control and tool-free assembly.
OLIXIS Full Adjustable Bed Key Specs
Size: Full
This frame is built for a standard Full-size mattress, which is wider than a Twin but narrower than a Queen. You should measure your current mattress to ensure it fits the 53.9-inch width and 74.8-inch length. This size suits single sleepers who want more space than a Twin offers, or couples who prefer a compact footprint in smaller bedrooms without sacrificing too much surface area.
Head Incline: 0-60°
The head section can raise from flat to a steep 60-degree angle. This wide range allows you to find a comfortable position for reading, watching TV, or elevating your upper body. A 60-degree tilt is significant for reducing acid reflux symptoms or easing breathing issues. You can adjust this precisely using the wireless remote to suit your specific comfort needs throughout the night.
Foot Incline: 0-40°
The foot section elevates up to 40 degrees, helping to improve circulation and reduce pressure on your lower legs. This feature is useful for swelling or general comfort during long periods of rest. Combined with the head incline, you can create a zero-gravity position that distributes weight evenly. This helps relieve stress on your spine and joints, promoting a more restful sleep experience.
Weight Capacity: 750 lb
The base supports a total load of 750 pounds, including the mattress and sleepers. This capacity is higher than many standard adjustable bases, providing stability for heavier individuals or dual sleepers. You can trust the motors to operate smoothly without strain under this weight. Always check that your combined weight stays within this limit to ensure the longevity of the frame and its mechanical components.
Remote Type: Wireless remote
Control comes via a handheld wireless remote that adjusts both head and foot positions. You do not need to reach for buttons on the frame itself, which adds convenience when getting in or out of bed. The remote allows for precise angle adjustments. Note that batteries are not included, so you will need to provide them to operate the motors and change your sleeping position.
Design and Build Overview
According to the listing, this OLIXIS bed base arrives in a black finish. The frame measures 53.9 inches wide and 74.8 inches long, with a profile height of 13.8 inches. These dimensions align with standard Full-size mattress requirements. The unit weighs 119 pounds, which suggests a sturdy metal construction capable of supporting up to 750 pounds. This weight capacity provides a solid foundation for hybrid, memory foam, or latex mattresses without excessive flex.
The layout includes integrated bed rails designed to prevent mattress slippage during adjustment. You do not need tools to assemble the unit. The process involves attaching the legs and rails, then plugging in the power cord. A wireless remote control manages the electric motors. This remote allows you to adjust the head incline from 0 to 60 degrees and the foot incline from 0 to 40 degrees. The wireless design keeps the bedside area clutter-free.
This design prioritizes ease of use and stability. The non-tool assembly makes it accessible for single-person setup. The wide range of motion supports various sleeping positions, from fully flat to fully upright. The fixed height and weight suggest it is intended for permanent bedroom placement rather than frequent moving. The black finish offers a neutral look that fits most bedroom decors. You control the position precisely with the included remote, ensuring comfort without needing to leave your bed.
Setup And Daily Use Guide
Setting up this OLIXIS adjustable bed base requires no tools. You begin by attaching the legs and installing the bed rails. These rails are designed to prevent your mattress from slipping during movement. Next, you plug in the power cord. The wireless remote control requires batteries, which are not included in the package. Once these steps are complete, the frame is ready for use.
The base is compatible with latex, hybrid foam, gel foam, and memory foam mattresses. It is not designed for innerspring or waterbeds. The frame supports a maximum weight of 750 pounds. This capacity applies to the combined weight of the sleepers and the mattress.
Daily operation is handled via the wireless remote. You can adjust the head incline from 0 to 60 degrees. The foot section adjusts from 0 to 40 degrees. These ranges allow for various positions, including lying flat, half-sitting, or fully sitting up. The zero-gravity setting tilts both sections to reduce pressure points. This configuration is intended to help with snoring, back pain, or mobility issues. You can fine-tune the angles to find a comfortable position for reading, watching television, or resting. The remote provides direct control over the motorized movements. There is no smartphone app mentioned in the specifications. All adjustments are made manually using the included remote device.
Before You Buy This Bed
You need a compatible mattress for this base. The listing specifies it works with latex, hybrid, foam, and gel foam options. You must ensure your mattress is flexible enough to bend with the 0 to 60 degree head and 0 to 40 degree foot inclines. Rigid innerspring units may not perform well. You should also verify that your bedroom has an accessible power outlet near the head of the bed. The unit requires batteries for the wireless remote, which are not included. Keep the remote in a safe place, as losing it means you cannot adjust the angles. This base fits alongside other adjustable frames in the 1 options on this page. It suits those who need elevation for snoring or back pain. Check your mattress warranty to confirm it allows use on adjustable bases. Regularly dust the frame and check the leg stability to maintain safety.
Check before you buy
- Confirm your mattress is compatible with adjustable bases.
- Ensure you have batteries for the wireless remote.
- Check that a power outlet is nearby.
- Measure your bedroom space for the 53.9-inch width.
The product at a glance
OLIXIS Full Adjustable Bed Base with Wireless Remote
Best for: Sleepers needing head and foot elevation
- Size
- Full
- Head Incline
- 0-60°
- Foot Incline
- 0-40°
- Weight Capacity
- 750 lb
- Remote Type
- Wireless remote
- USB Ports
- 2x USB
View on Amazon: OLIXIS Full Adjustable Bed Base with Wireless Remote Affiliate link
The OLIXIS Full Adjustable Bed Base offers independent head and foot incline for customized comfort. It adjusts the head up to 60° and the foot up to 40°. This electric frame supports up to 750 lbs and includes a wireless remote. It fits memory foam, latex, and hybrid mattresses. The design includes bed rails to prevent slipping. It is suitable for those seeking pressure relief or improved sleep posture.
Pros
- Head incline reaches 60° for deep reclining
- Foot incline reaches 40° for leg elevation
- 750 lb weight capacity supports heavier frames
- Wireless remote control for easy adjustment
- Tool-free assembly with included bed rails
Cons
- Only includes a wireless remote, no smartphone app
- Full size is narrower than Queen options
- Batteries for the remote are not included
Good fit if
- You need head and foot elevation for snoring or back pain
- You prefer a tool-free setup process
- You use a memory foam or hybrid mattress
Skip if
- You require app-based control or smart home integration
- You need a Queen or King size frame
- You want a base with built-in USB charging ports
Verdict: OLIXIS Full Adjustable Bed Base provides reliable head and foot articulation for pressure relief. It suits sleepers who want simple remote control and sturdy support without complex smart features.
Specifications side by side
| Spec | OLIXIS Full Adjustable Bed Base with Wireless Remote |
|---|---|
| Size | Full |
| Head Incline | 0-60° |
| Foot Incline | 0-40° |
| Weight Capacity | 750 lb |
| Remote Type | Wireless remote |
| USB Ports | 2x USB |
| Leg Height | 13.8 in |
| Dimensions | 53.9 × 74.8 × 13.8 inches |
| Weight | 119 pounds |
| Color | Black |
| Model | HJ3OL-DDC-F |
Frequently asked questions
Does this OLIXIS bed base include a wireless remote?
Yes, the listing confirms it comes with a wireless remote. This allows you to adjust the head and foot positions without getting out of bed. It provides a simple way to find your preferred incline for reading or relaxing before sleep.
What is the maximum head incline angle?
The head section can incline up to 60 degrees. This range helps relieve pressure on your back and neck. It is suitable for sleepers who need significant elevation for comfort or health reasons, such as reducing acid reflux.
Is this frame compatible with a memory foam mattress?
Yes, the base works with foam, gel foam, latex, and hybrid mattresses. You must ensure your mattress is flexible enough to bend with the 0 to 40 degree foot incline. Rigid mattresses may not articulate properly with this base.
How heavy is the OLIXIS adjustable bed frame?
The unit weighs 119 pounds. This substantial weight provides sturdy support for your mattress and body. It helps keep the base stable during adjustments, preventing unwanted shifting or wobbling while you change positions throughout the night.
What are the exact dimensions of the bed base?
The frame measures 53.9 inches wide and 74.8 inches long. The profile height is 13.8 inches. These dimensions align with standard Full-size mattress requirements. Always measure your space to ensure the bed fits comfortably in your bedroom layout.
Does the OLIXIS base require tools for assembly?
No tools are required for setup. You simply attach the legs and install the bed rails. The rails prevent your mattress from slipping during movement. This design allows you to get the bed ready for use quickly and easily.